No output video file...

vadimich · Post by **vadimich** » Sun Feb 26, 2006 6:54 am

After about 5.5 hours of converting, i got no output video file

please help..
thanks!

JF_ · Post by **JF_** » Sun Feb 26, 2006 11:33 am

Same here... Just used the new 0.4.3 beta to convert from a 350Mb xvid to DVD, no special options whatsoever, processing seems to go fine, no errormessages whatsoever, except 'job not done' in the end.
Audio extraction, video encoding, video pulldown, muxing, author script generation, authoring, all 'successful', with reasonable filesizes. But then things stop working:
[1:16:27] Start authoring ...
[1:16:29] Dvd authored successfully ! [ F:\0\Avi2dvd_temp\DVD ]
[1:16:29] Generating iso ...
[1:16:30] Iso generated successfully ! This is the file that you must burn --> [F:\0\Avi2dvd_temp\DVD_Image.iso -1 Bytes]
[1:16:30] Job NOT Done. There are warnings ... Find at the log file the 0 byte generated file to focus where exactly the problem appears

So it goes wrong during iso-generation, apparently, and there is not a damn thing left from 3 hours of processing.!

vadimich · Post by **vadimich** » Sun Feb 26, 2006 9:29 pm

except 'job not done' in the end.

in mine it said that it was succesfully finished, i think...

vadimich · Post by **vadimich** » Sun Mar 05, 2006 6:23 pm

Hello? Is this topic forgotten

Post by **trustfm** » Sun Mar 05, 2006 7:39 pm

do you use an simple path ? can i see the log file ? happens on all avis ?

jonx · Post by **jonx** » Wed Mar 08, 2006 7:15 pm

vadimich wrote:
except 'job not done' in the end.
in mine it said that it was succesfully finished, i think...

Same problem.. using 0.4.3 beta.

xeon · Post by **xeon** » Sun Mar 12, 2006 5:05 pm

[11:51:59 PM] AVI2DVD Started !
[11:52:00 PM] Type mode : Avi Input
[11:52:00 PM] Output : Dvd
[11:52:00 PM] Encoder Selected : HCEnc
[11:52:00 PM] Start demuxing the AudioStream No.1 ...
[11:52:16 PM] Demuxing of the selected audio finished
successfully ! [I:\Avi2dvd_temp\Extracted_Audio.ac3
119057959 Bytes]
[11:52:17 PM] Audio extracted renamed successfully !
[I:\Avi2dvd_temp\Fixed_Audio01.ac3 119057959 Bytes]
[11:52:17 PM] Starts Ac3->Ac3 convertion ...
[11:52:17 PM] Audio converted in Ac3 successfully !
[I:\Avi2dvd_temp\AudioStream 1 AC3 2CH.ac3 119057959
Bytes]
[11:52:17 PM] Start creating avisynth script ...
[11:52:17 PM] Avisynth script created successfully !
[I:\Avi2dvd_temp\Avisynth_Script_File.avs 144 Bytes]
[11:52:17 PM] Bitrate used : 7744 Kbpps
[11:52:17 PM] Start video encoding ...
[9:38:26 AM] Video encoded successfully !
[I:\Avi2dvd_temp\Encoded_Video.m2v 3552221727 Bytes]
[9:38:26 AM] Muxing Video+Audio(s) ...
[9:38:27 AM] M2v muxed successfully !
[I:\Avi2dvd_temp\Encoded_Video_Muxed.mpg -1 Bytes]
[9:38:28 AM] Job NOT Done. There are warnings ... Find at
the log file the 0 byte generated file to focus where exactly
the problem appears

Tried with the encoder options as noted in the "how-to" on this site. Got essentially the same thing when using the encoder as noted in a how-to from another site using this software. I deleted the directory and the log file for my first attempt.

Same deal with both: log file, AC3 file, M2V file and an AVISynth file... no ISO

vadimich · Post by **vadimich** » Thu Mar 16, 2006 4:46 am

hi!
trustfm
sorry for the long wait... here's the log:

[6:53:24 PM] AVI2DVD Started !
[6:53:25 PM] Type mode : Avi Input
[6:53:25 PM] Output : Dvd
[6:53:25 PM] Encoder Selected : QuEnc
[6:53:25 PM] Start demuxing the AudioStream No.1 ...
[6:53:48 PM] Demuxing of the selected audio finished
successfully ! [D:\Avi2dvd_temp\Extracted_Audio.mp3
104356512 Bytes]
[6:53:49 PM] Audio extracted renamed successfully !
[D:\Avi2dvd_temp\Fixed_Audio01.mp3 104356512 Bytes]
[6:53:49 PM] Starts Mp3->Ac3 convertion ...
[7:04:21 PM] Audio converted in Ac3 successfully !
[D:\Avi2dvd_temp\AudioStream 1 MP3 2CH.ac3
272621568 Bytes]
[7:04:21 PM] Start creating avisynth script ...
[7:04:21 PM] Avisynth script created successfully !
[D:\Avi2dvd_temp\Avisynth_Script_File.avs 152 Bytes]
[7:04:24 PM] Bitrate used : 5919 Kbpps
[7:04:24 PM] Start video encoding ...
[12:12:04 AM] Video encoded successfully !
[D:\Avi2dvd_temp\Encoded_Video.m2v 1980421654
Bytes]
[12:12:04 AM] Pulldown of the m2v is starting ...
[12:16:58 AM] M2v pulldowned successfully !
[D:\AVI2DV~1\Pulldown_Video.m2v 1980399616 Bytes]
[12:16:58 AM] Muxing Video+Audio(s) ...
[12:20:21 AM] M2v muxed successfully !
[D:\Avi2dvd_temp\Encoded_Video_Muxed.mpg
2314786816 Bytes]
[12:20:21 AM] One subtitle found
[12:20:21 AM] Spumux script generation ...
[12:20:21 AM] Spumux script generated successfully !
[12:20:21 AM] Muxing the subtitle...
[12:20:23 AM] Subitles muxed successfully !
[D:\Avi2dvd_temp\Encoded_Video_Muxed_Subbed.mpg 0
Bytes]
[12:20:23 AM] Job NOT Done. There are warnings ... Find
at the log file the 0 byte generated file to focus where
exactly the problem appears

I didn't try it with another avis... If the log doesn't tell you anything, then I'll try to convert other avis...

steviebrutal · Post by **steviebrutal** » Thu Mar 16, 2006 7:15 pm

I have a similar problem, but in my case an output file is generated with 0 bytes. Throughout the entirity of the encode, the file is 0 bytes. Im not sure of the problem. Used HCENC. OGM file with XVID video and Ogg Vorbis Audio.

[11:28:27 AM] AVI2DVD Started !
[11:28:29 AM] Type mode : Avi Input
[11:28:29 AM] Output : Dvd
[11:28:29 AM] Encoder Selected : HCEnc
[11:28:29 AM] Start demuxing the AudioStream No.1 ...
[11:28:48 AM] Demuxing of the selected audio finished
successfully ! [C:\howl\Avi2dvd_temp\Extracted_Audio.ogg
75204973 Bytes]
[11:28:53 AM] Audio extracted renamed successfully !
[C:\howl\Avi2dvd_temp\Fixed_Audio01.ogg 75204973
Bytes]
[11:28:53 AM] Starts Ogg->Ac3 convertion ...
[11:34:32 AM] Audio converted in Ac3 successfully !
[C:\howl\Avi2dvd_temp\AudioStream 1 OGG 0CH.ac3
343157760 Bytes]
[11:34:32 AM] Start creating avisynth script ...
[11:34:32 AM] Avisynth script created successfully !
[C:\howl\Avi2dvd_temp\Avisynth_Script_File.avs 167
Bytes]
[11:34:33 AM] Bitrate used : 4624 Kbpps
[11:34:33 AM] Start video encoding ...
[2:04:57 PM] Video encoded successfully !
[C:\howl\Avi2dvd_temp\Encoded_Video.m2v 0 Bytes]
[2:04:57 PM] Job NOT Done. There are warnings ... Find at
the log file the 0 byte generated file to focus where exactly
the problem appears

moza · Post by **moza** » Mon Apr 03, 2006 8:58 am

actually, my problem is exactly the same (same version), who can help?
I tried to see the folder avi2dvd_temp while the program is working, First, the job is done until it is finish, and a file is build in the folder avi2dvd_temp, which size is not zero, but at the end of the conversion, a command window (those black ones) appears very fast and disappears as well, and in the same time, the file which was just build disappears as well... What can it be?? Thanks for help!
[10:20:12] AVI2DVD Started !
[10:20:12] Type mode : Avi Input
[10:20:12] Output : Dvd
[10:20:12] Encoder Selected : Other External Encoder
[10:20:12] Start demuxing the AudioStream No.1 ...
[10:20:54] Demuxing of the selected audio finished
successfully ! [C:\...\Avi2dvd_temp\Extracted_Audio.mp3
41153424 Bytes]
[10:20:57] Audio extracted renamed successfully !
[C:\...\Avi2dvd_temp\Fixed_Audio01.mp3 41153424 Bytes]
[10:20:57] Starts Mp3->Ac3 convertion ...
[10:20:58] Audio converted in Ac3 successfully !
[C:\Documents and Settings\...\Avi2dvd_temp\AudioStream 1
MP3 2CH.ac3 -1 Bytes]
[10:20:58] Job NOT Done. There are warnings ... Find at
the log file the 0 byte generated file to focus where exactly
the problem appears