No output video file...
Moderators: george, roger_rabbit, reburn, Excalibur!, skyheartblue
no output video file
I still had the same problem with the new release 0.4.4 beta, even though the ChangeLog states that the 0 byte iso problem had been fixed. So I thought I should maybe have uninstalled the older version first before installing the new one, which I then did. Restarted the computer, cleaned up the register etc. etc. Now AVI2DVD not even gets to where it says 0 byte videofile, but it gives the error message 'Access violation at address 7C9122BA in module 'ntdll.dll'. Read of address F8B39FA9.' The log is:
[9:37:51] AVI2DVD Started !
[9:37:53] Type mode : Avi Input
[9:37:53] Output : Dvd
[9:37:53] Encoder Selected : CCE
[9:37:53] Join Subtitle No.2 ...
[9:37:53] Start demuxing the AudioStream No.1 ...
[9:39:10] Demuxing of the selected audio finished successfully ! [C:\WERKMAP AVI2DVD\Avi2dvd_temp\Extracted_Audio.mp3 117748297 Bytes]
[9:39:10] Starts Audio correction ...
[9:39:28] Audio Fixed successfully ! [C:\WERKMAP AVI2DVD\Avi2dvd_temp\Fixed_Audio01.mp3 117748297 Bytes]
[9:39:28] Starts Mp3->Ac3 convertion ...
[9:50:58] Audio converted in Ac3 successfully ! [C:\WERKMAP AVI2DVD\Avi2dvd_temp\AudioStream 1 MP3 2CH.ac3 353238528 Bytes]
[9:50:58] Start creating avisynth script ...
[9:50:58] Avisynth script created successfully ! [C:\WERKMAP AVI2DVD\Avi2dvd_temp\Avisynth_Script_File.avs 160 Bytes]
[9:37:51] AVI2DVD Started !
[9:37:53] Type mode : Avi Input
[9:37:53] Output : Dvd
[9:37:53] Encoder Selected : CCE
[9:37:53] Join Subtitle No.2 ...
[9:37:53] Start demuxing the AudioStream No.1 ...
[9:39:10] Demuxing of the selected audio finished successfully ! [C:\WERKMAP AVI2DVD\Avi2dvd_temp\Extracted_Audio.mp3 117748297 Bytes]
[9:39:10] Starts Audio correction ...
[9:39:28] Audio Fixed successfully ! [C:\WERKMAP AVI2DVD\Avi2dvd_temp\Fixed_Audio01.mp3 117748297 Bytes]
[9:39:28] Starts Mp3->Ac3 convertion ...
[9:50:58] Audio converted in Ac3 successfully ! [C:\WERKMAP AVI2DVD\Avi2dvd_temp\AudioStream 1 MP3 2CH.ac3 353238528 Bytes]
[9:50:58] Start creating avisynth script ...
[9:50:58] Avisynth script created successfully ! [C:\WERKMAP AVI2DVD\Avi2dvd_temp\Avisynth_Script_File.avs 160 Bytes]
The same as me, i've uninstalled 0.4.3 beta and make a install for 0.4.4. but same error is there. I really dont know wht happened, the 0.4.3 was working ok, but it suddenly stop working and start giving this error. There is any special step that i need to do in order to fix the problem?
[20:18:49] AVI2DVD Started !
[20:18:51] Type mode : Avi Input
[20:18:51] Output : Dvd
[20:18:51] Encoder Selected : QuEnc
[20:18:51] Start demuxing the AudioStream No.1 ...
[20:19:27] Demuxing of the selected audio finished
successfully ! [D:\Avi2dvd_temp\Extracted_Audio.mp3
85948512 Bytes]
[20:19:27] Starts Audio correction ...
[20:19:46] Audio Fixed successfully !
[D:\Avi2dvd_temp\Fixed_Audio01.mp3 85948640 Bytes]
[20:19:46] Starts Mp3->Ac3 convertion ...
[20:25:00] Audio converted in Ac3 successfully !
[D:\Avi2dvd_temp\AudioStream 1 MP3 2CH.ac3
263314944 Bytes]
[20:25:02] Start creating avisynth script ...
[20:25:02] Avisynth script created successfully !
[D:\Avi2dvd_temp\Avisynth_Script_File.avs 228 Bytes]
[20:25:03] Bitrate used : 6526 Kbpps
[20:25:03] Start video encoding ...
[21:55:32] Video encoded successfully !
[D:\Avi2dvd_temp\Encoded_Video.m2v 1886520198
Bytes]
[21:55:32] Pulldown of the m2v is starting ...
[21:59:29] M2v pulldowned successfully !
[D:\AVI2DV~1\Pulldown_Video.m2v 1886519296 Bytes]
[21:59:29] Muxing Video+Audio(s) ...
[22:03:38] M2v muxed successfully !
[D:\Avi2dvd_temp\Encoded_Video_Muxed.mpg
2208860160 Bytes]
[22:03:38] One subtitle found
[22:03:38] Spumux script generation ...
[22:03:38] Spumux script generated successfully !
[22:03:38] Muxing the subtitle...
[22:03:40] Subitles muxed successfully !
[D:\Avi2dvd_temp\Encoded_Video_Muxed_Subbed.mpg 0
Bytes]
[22:03:40] Job NOT Done. There are warnings ... Find at
the log file the 0 byte generated file to focus where exactly
the problem appears
[20:18:49] AVI2DVD Started !
[20:18:51] Type mode : Avi Input
[20:18:51] Output : Dvd
[20:18:51] Encoder Selected : QuEnc
[20:18:51] Start demuxing the AudioStream No.1 ...
[20:19:27] Demuxing of the selected audio finished
successfully ! [D:\Avi2dvd_temp\Extracted_Audio.mp3
85948512 Bytes]
[20:19:27] Starts Audio correction ...
[20:19:46] Audio Fixed successfully !
[D:\Avi2dvd_temp\Fixed_Audio01.mp3 85948640 Bytes]
[20:19:46] Starts Mp3->Ac3 convertion ...
[20:25:00] Audio converted in Ac3 successfully !
[D:\Avi2dvd_temp\AudioStream 1 MP3 2CH.ac3
263314944 Bytes]
[20:25:02] Start creating avisynth script ...
[20:25:02] Avisynth script created successfully !
[D:\Avi2dvd_temp\Avisynth_Script_File.avs 228 Bytes]
[20:25:03] Bitrate used : 6526 Kbpps
[20:25:03] Start video encoding ...
[21:55:32] Video encoded successfully !
[D:\Avi2dvd_temp\Encoded_Video.m2v 1886520198
Bytes]
[21:55:32] Pulldown of the m2v is starting ...
[21:59:29] M2v pulldowned successfully !
[D:\AVI2DV~1\Pulldown_Video.m2v 1886519296 Bytes]
[21:59:29] Muxing Video+Audio(s) ...
[22:03:38] M2v muxed successfully !
[D:\Avi2dvd_temp\Encoded_Video_Muxed.mpg
2208860160 Bytes]
[22:03:38] One subtitle found
[22:03:38] Spumux script generation ...
[22:03:38] Spumux script generated successfully !
[22:03:38] Muxing the subtitle...
[22:03:40] Subitles muxed successfully !
[D:\Avi2dvd_temp\Encoded_Video_Muxed_Subbed.mpg 0
Bytes]
[22:03:40] Job NOT Done. There are warnings ... Find at
the log file the 0 byte generated file to focus where exactly
the problem appears
[9:14:10 PM] AVI2DVD Started !
[9:14:12 PM] Type mode : Avi Input
[9:14:12 PM] Output : Dvd
[9:14:12 PM] Encoder Selected : QuEnc
[9:14:12 PM] Start demuxing the AudioStream No.1 ...
[9:16:03 PM] Demuxing of the selected audio finished
successfully ! [D:\Avi2dvd_temp\Extracted_Audio.ac3
122191104 Bytes]
[9:16:11 PM] Audio extracted renamed successfully !
[D:\Avi2dvd_temp\Fixed_Audio01.ac3 122191104 Bytes]
[9:16:11 PM] Starts Ac3->Ac3 convertion ...
[9:16:11 PM] Audio converted in Ac3 successfully !
[D:\Avi2dvd_temp\AudioStream 1 AC3 6CH.ac3
122191104 Bytes]
[9:16:11 PM] Start creating avisynth script ...
[9:16:11 PM] Avisynth script created successfully !
[D:\Avi2dvd_temp\Avisynth_Script_File.avs 155 Bytes]
[9:16:12 PM] Bitrate used : 7552 Kbpps
[9:16:12 PM] Start video encoding ...
[12:58:19 AM] Video encoded successfully !
[D:\Avi2dvd_temp\Encoded_Video.m2v 1599081003
Bytes]
[12:58:19 AM] Muxing Video+Audio(s) ...
[1:02:14 AM] M2v muxed successfully !
[D:\Avi2dvd_temp\Encoded_Video_Muxed.mpg
1755418624 Bytes]
[1:02:14 AM] Zero subtitles found
[1:02:14 AM] Author script generation ...
[1:02:14 AM] Author script generated successfully !
[1:02:14 AM] Start authoring ...
[1:02:21 AM] Dvd authored successfully ! [
D:\Avi2dvd_temp\DVD ]
[1:02:21 AM] Generating iso ...
[1:02:22 AM] Iso generated successfully ! This is the file
that you must burn --> [D:\Avi2dvd_temp\DVD_Image.iso
901120 Bytes]
[1:02:22 AM] Job Done !!!
in my case, all the steps were successful, so i image burn the
file dvd_image, but when i play it on my intervideo windvd, it
just won't play. i played it on my dvd to check, and the player
can't read it as well.
these are the files inside the folder:
dvd folder
audiostream 1 ac3
avisynth_script_file
dvd image and the log.
inside the dvd folder are 2 subfolders: the audio and the video.
there's no file inside the audio??? and just 1 file on the video
folder which is vts_01_0.
help pls.
[9:14:12 PM] Type mode : Avi Input
[9:14:12 PM] Output : Dvd
[9:14:12 PM] Encoder Selected : QuEnc
[9:14:12 PM] Start demuxing the AudioStream No.1 ...
[9:16:03 PM] Demuxing of the selected audio finished
successfully ! [D:\Avi2dvd_temp\Extracted_Audio.ac3
122191104 Bytes]
[9:16:11 PM] Audio extracted renamed successfully !
[D:\Avi2dvd_temp\Fixed_Audio01.ac3 122191104 Bytes]
[9:16:11 PM] Starts Ac3->Ac3 convertion ...
[9:16:11 PM] Audio converted in Ac3 successfully !
[D:\Avi2dvd_temp\AudioStream 1 AC3 6CH.ac3
122191104 Bytes]
[9:16:11 PM] Start creating avisynth script ...
[9:16:11 PM] Avisynth script created successfully !
[D:\Avi2dvd_temp\Avisynth_Script_File.avs 155 Bytes]
[9:16:12 PM] Bitrate used : 7552 Kbpps
[9:16:12 PM] Start video encoding ...
[12:58:19 AM] Video encoded successfully !
[D:\Avi2dvd_temp\Encoded_Video.m2v 1599081003
Bytes]
[12:58:19 AM] Muxing Video+Audio(s) ...
[1:02:14 AM] M2v muxed successfully !
[D:\Avi2dvd_temp\Encoded_Video_Muxed.mpg
1755418624 Bytes]
[1:02:14 AM] Zero subtitles found
[1:02:14 AM] Author script generation ...
[1:02:14 AM] Author script generated successfully !
[1:02:14 AM] Start authoring ...
[1:02:21 AM] Dvd authored successfully ! [
D:\Avi2dvd_temp\DVD ]
[1:02:21 AM] Generating iso ...
[1:02:22 AM] Iso generated successfully ! This is the file
that you must burn --> [D:\Avi2dvd_temp\DVD_Image.iso
901120 Bytes]
[1:02:22 AM] Job Done !!!
in my case, all the steps were successful, so i image burn the
file dvd_image, but when i play it on my intervideo windvd, it
just won't play. i played it on my dvd to check, and the player
can't read it as well.
these are the files inside the folder:
dvd folder
audiostream 1 ac3
avisynth_script_file
dvd image and the log.
inside the dvd folder are 2 subfolders: the audio and the video.
there's no file inside the audio??? and just 1 file on the video
folder which is vts_01_0.
help pls.
Encoded_Video.m2v 0 Bytes
Am having the same problem as the previous posts. Here is a copy of my log file.
[11:39:25 AM] AVI2DVD Started !
[11:39:40 AM] Type mode : Avi Input
[11:39:40 AM] Output : Dvd
[11:39:40 AM] Encoder Selected : QuEnc
[11:39:40 AM] Start demuxing the AudioStream No.1 ...
[11:40:27 AM] Demuxing of the selected audio finished
successfully ! [C:\Avi2dvd_temp\Extracted_Audio.mp3
82193352 Bytes]
[11:40:27 AM] Starts Audio correction ...
[11:41:04 AM] Audio Fixed successfully !
[C:\Avi2dvd_temp\Fixed_Audio01.mp3 82193352 Bytes]
[11:41:04 AM] Starts Mp3->Ac3 convertion ...
[11:54:14 AM] Audio converted in Ac3 successfully !
[C:\Avi2dvd_temp\AudioStream 1 MP3 2CH.ac3
291990528 Bytes]
[11:54:14 AM] Start creating avisynth script ...
[11:54:14 AM] Avisynth script created successfully !
[C:\Avi2dvd_temp\Avisynth_Script_File.avs 144 Bytes]
[11:54:17 AM] Bitrate used : 5501 Kbpps
[11:54:17 AM] Start video encoding ...
[2:23:38 PM] Video encoded successfully !
[C:\Avi2dvd_temp\Encoded_Video.m2v 0 Bytes]
[2:23:39 PM] Job NOT Done. There are warnings ... Find at
the log file the 0 byte generated file to focus where exactly
the problem appears
tnx for the help
wph
[11:39:25 AM] AVI2DVD Started !
[11:39:40 AM] Type mode : Avi Input
[11:39:40 AM] Output : Dvd
[11:39:40 AM] Encoder Selected : QuEnc
[11:39:40 AM] Start demuxing the AudioStream No.1 ...
[11:40:27 AM] Demuxing of the selected audio finished
successfully ! [C:\Avi2dvd_temp\Extracted_Audio.mp3
82193352 Bytes]
[11:40:27 AM] Starts Audio correction ...
[11:41:04 AM] Audio Fixed successfully !
[C:\Avi2dvd_temp\Fixed_Audio01.mp3 82193352 Bytes]
[11:41:04 AM] Starts Mp3->Ac3 convertion ...
[11:54:14 AM] Audio converted in Ac3 successfully !
[C:\Avi2dvd_temp\AudioStream 1 MP3 2CH.ac3
291990528 Bytes]
[11:54:14 AM] Start creating avisynth script ...
[11:54:14 AM] Avisynth script created successfully !
[C:\Avi2dvd_temp\Avisynth_Script_File.avs 144 Bytes]
[11:54:17 AM] Bitrate used : 5501 Kbpps
[11:54:17 AM] Start video encoding ...
[2:23:38 PM] Video encoded successfully !
[C:\Avi2dvd_temp\Encoded_Video.m2v 0 Bytes]
[2:23:39 PM] Job NOT Done. There are warnings ... Find at
the log file the 0 byte generated file to focus where exactly
the problem appears
tnx for the help
wph
i figured the video file should be in the same folder as the
software, i forgot if it's in the images or sound folder bec.
that's when the conversion finally became a success after
several attempts [imagine the waste of time and energy
i've consumed]. anyway, i stopped using the software now
bec. of so many hassles i've encountered and limitations
of the product.
software, i forgot if it's in the images or sound folder bec.
that's when the conversion finally became a success after
several attempts [imagine the waste of time and energy
i've consumed]. anyway, i stopped using the software now
bec. of so many hassles i've encountered and limitations
of the product.
