Every time I run Avi2DVD to make a DVD from an existing avi file it randomly stops a few minutes in. I read on another post about this "0 byte" message being related to subtitles, but I'm not using any. Here's my log:
[7:52:13 PM] AVI2DVD Started !
[7:52:16 PM] Type mode : Avi Input
[7:52:16 PM] Output : Dvd
[7:52:16 PM] Encoder Selected : QuEnc
[7:52:16 PM] Start demuxing the AudioStream No.1 ...
[7:52:40 PM] Demuxing of the selected audio finished
successfully !
[C:\Temp\Avi2dvd_temp\Extracted_Audio.mp3 65792159
Bytes]
[7:52:40 PM] Starts Audio correction ...
[7:52:47 PM] Audio Fixed successfully !
[C:\Temp\Avi2dvd_temp\Fixed_Audio01.mp3 65791710
Bytes]
[7:52:47 PM] Starts Mp3->Ac3 convertion ...
[7:58:54 PM] Audio converted in Ac3 successfully !
[C:\Temp\Avi2dvd_temp\AudioStream 1 MP3 2CH.ac3
263164416 Bytes]
[7:58:54 PM] Start creating avisynth script ...
[7:58:54 PM] Avisynth script created successfully !
[C:\Temp\Avi2dvd_temp\Avisynth_Script_File.avs 155
Bytes]
[7:58:55 PM] Bitrate used : 6144 Kbpps
[7:58:55 PM] Start video encoding ...
[7:58:56 PM] Video encoded successfully !
[C:\Temp\Avi2dvd_temp\Encoded_Video.m2v 0 Bytes]
[7:58:56 PM] Job NOT Done. There are warnings ... Find at
the log file the 0 byte generated file to focus where exactly
the problem appears[/b]
Help?
0 byte problem?
Moderators: george, roger_rabbit, reburn, Excalibur!, skyheartblue
-
- Junior Member
- Posts: 3
- Joined: Tue Dec 05, 2006 2:15 am
Hi Cerberis,
I just ran into the same problem (however, my AVI does have a Subtitle ... an SRT) ... my logfile is the same as yours word for word ... except the last line that you highlighted for mine it says
"1 Bytes" versus your "0 Bytes" ...
Q: for the experts ... does this mean that I have same probelm or a different problem because of that 1 integer?
Thanks,
G!
I just ran into the same problem (however, my AVI does have a Subtitle ... an SRT) ... my logfile is the same as yours word for word ... except the last line that you highlighted for mine it says
"1 Bytes" versus your "0 Bytes" ...
Q: for the experts ... does this mean that I have same probelm or a different problem because of that 1 integer?
Thanks,
G!
-
- Junior Member
- Posts: 3
- Joined: Tue Dec 05, 2006 2:15 am
-
- Junior Member
- Posts: 10
- Joined: Sat Apr 22, 2006 6:42 am
?
I get a similar thing in terms of the log
[19:07:01] AVI2DVD Started !
[19:07:01] Type mode : Avi Input
[19:07:01] Output : Dvd
[19:07:01] Encoder Selected : QuEnc
[19:07:01] Start demuxing the AudioStream No.1 ...
[19:07:53] Demuxing of the selected audio finished
successfully ! [C:\Documents and Settings\Avi2dvd_temp
\Extracted_Audio.mp3 104085216 Bytes]
[19:07:53] Starts Audio correction ...
[19:08:15] Audio Fixed successfully ! [C:\Documents and
Settings\Avi2dvd_temp\Fixed_Audio01.mp3 104085216
Bytes]
[19:08:15] Starts Mp3->Ac3 convertion ...
[19:21:26] Audio converted in Ac3 successfully !
[C:\Documents and Settings\Avi2dvd_temp\AudioStream 1 MP3 2CH.ac3
416338944 Bytes]
[19:21:26] Start creating avisynth script ...
[19:21:26] Avisynth script created successfully !
[C:\Documents and Settings\Avi2dvd_temp\Avisynth_Script_File.avs 223 Bytes]
[19:21:41] Bitrate used : 3743 Kbpps
[19:21:41] Start video encoding ...
[19:24:38] Video encoded successfully ! [C:\Documents
and Settings\Avi2dvd_temp\Encoded_Video.m2v 0 Bytes]
19:24:38] Job NOT Done. There are warnings ... Find at
the log file the 0 byte generated file to focus where exactly
the problem appears
The problem occurs when QuEnc opens up an error report comes up saying that QuEnc will have to close do i want to report the problem.
I do what the link above says anyway so no difference there and also have tried uninstalling and reinstalling the software.
Which sorted out the interface not supported problem for me.
am really stumped with this one any one have any ideas?
[19:07:01] AVI2DVD Started !
[19:07:01] Type mode : Avi Input
[19:07:01] Output : Dvd
[19:07:01] Encoder Selected : QuEnc
[19:07:01] Start demuxing the AudioStream No.1 ...
[19:07:53] Demuxing of the selected audio finished
successfully ! [C:\Documents and Settings\Avi2dvd_temp
\Extracted_Audio.mp3 104085216 Bytes]
[19:07:53] Starts Audio correction ...
[19:08:15] Audio Fixed successfully ! [C:\Documents and
Settings\Avi2dvd_temp\Fixed_Audio01.mp3 104085216
Bytes]
[19:08:15] Starts Mp3->Ac3 convertion ...
[19:21:26] Audio converted in Ac3 successfully !
[C:\Documents and Settings\Avi2dvd_temp\AudioStream 1 MP3 2CH.ac3
416338944 Bytes]
[19:21:26] Start creating avisynth script ...
[19:21:26] Avisynth script created successfully !
[C:\Documents and Settings\Avi2dvd_temp\Avisynth_Script_File.avs 223 Bytes]
[19:21:41] Bitrate used : 3743 Kbpps
[19:21:41] Start video encoding ...
[19:24:38] Video encoded successfully ! [C:\Documents
and Settings\Avi2dvd_temp\Encoded_Video.m2v 0 Bytes]
19:24:38] Job NOT Done. There are warnings ... Find at
the log file the 0 byte generated file to focus where exactly
the problem appears
The problem occurs when QuEnc opens up an error report comes up saying that QuEnc will have to close do i want to report the problem.
I do what the link above says anyway so no difference there and also have tried uninstalling and reinstalling the software.
Which sorted out the interface not supported problem for me.
am really stumped with this one any one have any ideas?