I am new to video editing. I want to burn our home videos to dvd with menus but am having trouble with avi2dvd. It seems to do everything ok but does not seem to finish. Here is the log file.
12:05:38 PM] AVI2DVD Started !
[12:05:40 PM] Type mode : Avi Input
[12:05:40 PM] Output : Dvd
[12:05:40 PM] Encoder Selected : QuEnc
[12:05:40 PM] Start demuxing the AudioStream No.1 ...
[12:05:40 PM] Demuxing of the selected audio finished
successfully ! [C:\Documents and Settings\James\My
Documents\My
Videos\Avi2dvd_temp\Extracted_Audio.wav 1624110
Bytes]
[12:05:40 PM] Audio extracted renamed successfully !
[C:\Documents and Settings\James\My Documents\My
Videos\Avi2dvd_temp\Fixed_Audio01.wav 1624110 Bytes]
[12:05:40 PM] Starts Wav->Ac3 convertion ...
[12:05:42 PM] Audio converted in Ac3 successfully !
[C:\Documents and Settings\James\My Documents\My
Videos\Avi2dvd_temp\AudioStream 1 WMA 0CH.ac3
608256 Bytes]
[12:05:42 PM] Start creating avisynth script ...
[12:05:42 PM] Avisynth script created successfully !
[C:\Documents and Settings\James\My Documents\My
Videos\Avi2dvd_temp\Avisynth_Script_File.avs 242 Bytes]
[12:05:42 PM] Bitrate used : 7616 Kbpps
[12:05:42 PM] Start video encoding ...
[12:06:12 PM] Video encoded successfully ! [C:\Documents
and Settings\James\My Documents\My
Videos\Avi2dvd_temp\Encoded_Video.m2v 8210228
Bytes]
[12:06:12 PM] Muxing Video+Audio(s) ...
[12:06:13 PM] M2v muxed successfully ! [C:\Documents
and Settings\James\My Documents\My
Videos\Avi2dvd_temp\Encoded_Video_Muxed.mpg
9005056 Bytes]
[12:06:13 PM] One subtitle found
[12:06:13 PM] Spumux script generation ...
[12:06:13 PM] Spumux script generated successfully !
[12:06:13 PM] Muxing the subtitle...
[12:06:14 PM] Subitles muxed successfully ! [C:\Documents
and Settings\James\My Documents\My
Videos\Avi2dvd_temp\Encoded_Video_Muxed_Subbed.mp
g 0 Bytes]
[12:06:14 PM] Job NOT Done. There are warnings ... Find
at the log file the 0 byte generated file to focus where
exactly the problem appears
What am I doing wrong. It leaves certain files but no dvd.iso file or files I can burn to dvd.
0 buyes generated
Moderators: george, roger_rabbit, reburn, Excalibur!, skyheartblue
-
icecold killa
- Junior Member
- Posts: 10
- Joined: Sat Apr 22, 2006 6:42 am
I think quite a few people have experienced the same problem as you at some point, including me. My suggestion may sound simple...but it sorted out the problem for me.
P.S BEFORE FOLLOWING THESE STEPS, MAKE SURE YOU DOWNLOAD THE LATEST DIVX CODECS
It's all to do with changing filenames so they are not complicated, to be safe i make sure all my movies files and folders are "one" word only. Just follow these 4 steps below:
1 - For example, if i am converting a movie called "House Party 028" i would first rename it to something like just "Party"
2 - Put the movie your converting directly into one folder on your main hard drive (mines C drive yours may be named diffrent.), call the new folder something like "Movie".
e.g C:\Movie\Party.avi (this is were the movie file you want to convert is located)
3 - Make your output folder to something very simple as well. Directly on your main hardrive like above but create a folder called "Party" for example.
e.g C:\Party (avi2dvd will create a new folder called "Avi2dvd_temp" in that location, this is were your finished movie files will be.)
4 - Last thing, in the "Step2" tab on avi2dvd if you have ticked "Make Iso" make sure in the "Name" field you name the iso something that is no more than one word just to be safe. For example i could name it to something like just "Party"
Hope this helps you solve your problem, reply back and let me know how you got on.
P.S BEFORE FOLLOWING THESE STEPS, MAKE SURE YOU DOWNLOAD THE LATEST DIVX CODECS
It's all to do with changing filenames so they are not complicated, to be safe i make sure all my movies files and folders are "one" word only. Just follow these 4 steps below:
1 - For example, if i am converting a movie called "House Party 028" i would first rename it to something like just "Party"
2 - Put the movie your converting directly into one folder on your main hard drive (mines C drive yours may be named diffrent.), call the new folder something like "Movie".
e.g C:\Movie\Party.avi (this is were the movie file you want to convert is located)
3 - Make your output folder to something very simple as well. Directly on your main hardrive like above but create a folder called "Party" for example.
e.g C:\Party (avi2dvd will create a new folder called "Avi2dvd_temp" in that location, this is were your finished movie files will be.)
4 - Last thing, in the "Step2" tab on avi2dvd if you have ticked "Make Iso" make sure in the "Name" field you name the iso something that is no more than one word just to be safe. For example i could name it to something like just "Party"
Hope this helps you solve your problem, reply back and let me know how you got on.
I get a similar thing in terms of the log
[19:07:01] AVI2DVD Started !
[19:07:01] Type mode : Avi Input
[19:07:01] Output : Dvd
[19:07:01] Encoder Selected : QuEnc
[19:07:01] Start demuxing the AudioStream No.1 ...
[19:07:53] Demuxing of the selected audio finished
successfully ! [C:\Documents and Settings\Avi2dvd_temp
\Extracted_Audio.mp3 104085216 Bytes]
[19:07:53] Starts Audio correction ...
[19:08:15] Audio Fixed successfully ! [C:\Documents and
Settings\Avi2dvd_temp\Fixed_Audio01.mp3 104085216
Bytes]
[19:08:15] Starts Mp3->Ac3 convertion ...
[19:21:26] Audio converted in Ac3 successfully !
[C:\Documents and Settings\Avi2dvd_temp\AudioStream 1 MP3 2CH.ac3
416338944 Bytes]
[19:21:26] Start creating avisynth script ...
[19:21:26] Avisynth script created successfully !
[C:\Documents and Settings\Avi2dvd_temp\Avisynth_Script_File.avs 223 Bytes]
[19:21:41] Bitrate used : 3743 Kbpps
[19:21:41] Start video encoding ...
[19:24:38] Video encoded successfully ! [C:\Documents
and Settings\Avi2dvd_temp\Encoded_Video.m2v 0 Bytes]
19:24:38] Job NOT Done. There are warnings ... Find at
the log file the 0 byte generated file to focus where exactly
the problem appears
The problem occurs when QuEnc opens up an error report comes up saying that QuEnc will have to close do i want to report the problem.
I do what is said above says anyway so no difference there and also have tried uninstalling and reinstalling the software.
Which sorted out the interface not supported problem for me.
am really stumped with this one any one have any ideas?
[19:07:01] AVI2DVD Started !
[19:07:01] Type mode : Avi Input
[19:07:01] Output : Dvd
[19:07:01] Encoder Selected : QuEnc
[19:07:01] Start demuxing the AudioStream No.1 ...
[19:07:53] Demuxing of the selected audio finished
successfully ! [C:\Documents and Settings\Avi2dvd_temp
\Extracted_Audio.mp3 104085216 Bytes]
[19:07:53] Starts Audio correction ...
[19:08:15] Audio Fixed successfully ! [C:\Documents and
Settings\Avi2dvd_temp\Fixed_Audio01.mp3 104085216
Bytes]
[19:08:15] Starts Mp3->Ac3 convertion ...
[19:21:26] Audio converted in Ac3 successfully !
[C:\Documents and Settings\Avi2dvd_temp\AudioStream 1 MP3 2CH.ac3
416338944 Bytes]
[19:21:26] Start creating avisynth script ...
[19:21:26] Avisynth script created successfully !
[C:\Documents and Settings\Avi2dvd_temp\Avisynth_Script_File.avs 223 Bytes]
[19:21:41] Bitrate used : 3743 Kbpps
[19:21:41] Start video encoding ...
[19:24:38] Video encoded successfully ! [C:\Documents
and Settings\Avi2dvd_temp\Encoded_Video.m2v 0 Bytes]
19:24:38] Job NOT Done. There are warnings ... Find at
the log file the 0 byte generated file to focus where exactly
the problem appears
The problem occurs when QuEnc opens up an error report comes up saying that QuEnc will have to close do i want to report the problem.
I do what is said above says anyway so no difference there and also have tried uninstalling and reinstalling the software.
Which sorted out the interface not supported problem for me.
am really stumped with this one any one have any ideas?