Problem with an 0 Byte File

kayman · Post by **kayman** » Mon Oct 30, 2006 4:50 pm

After encoding an avi-file I?ve got only an audio stream, but no video...

I hope, somebody here may help me...

Thanks
Kay

Here?s the log file:

[21:12:27] AVI2DVD Started !
[21:12:30] Type mode : Avi Input
[21:12:30] Output : Dvd
[21:12:30] Encoder Selected : HCEnc
[21:12:30] Start demuxing the AudioStream No.1 ...
[21:12:42] Demuxing of the selected audio finished
successfully ! [D:\lwr\Avi2dvd_temp\Extracted_Audio.mp3
43601977 Bytes]
[21:12:42] Starts Audio correction ...
[21:12:47] Audio Fixed successfully !
[D:\lwr\Avi2dvd_temp\Fixed_Audio01.mp3 43601977
Bytes]
[21:12:47] Starts Mp3->Ac3 convertion ...
[21:15:45] Audio converted in Ac3 successfully !
[D:\lwr\Avi2dvd_temp\AudioStream 1 MP3 2CH.ac3
76302464 Bytes]
[21:15:45] Start creating avisynth script ...
[21:15:45] Avisynth script created successfully !
[D:\lwr\Avi2dvd_temp\Avisynth_Script_File.avs 149 Bytes]
[21:15:45] Bitrate used : 7776 Kbpps
[21:15:45] Start video encoding ...
[01:27:59] Video encoded successfully !
[D:\lwr\Avi2dvd_temp\Encoded_Video.m2v 2568299538
Bytes]
[01:27:59] Muxing Video+Audio(s) ...
[01:33:30] M2v muxed successfully !
[D:\lwr\Avi2dvd_temp\Encoded_Video_Muxed.mpg
2689472512 Bytes]
[01:33:30] Zero subtitles found
[01:33:30] Author script generation ...
[01:33:30] Author script generated successfully !
[01:33:30] Start authoring ...
[01:33:35] Dvd authored successfully ! [
D:\lwr\Avi2dvd_temp\DVD ]
[01:33:35] Generating iso ...
[01:33:36] Iso generated successfully ! This is the file that
you must burn --> [D:\lwr\Avi2dvd_temp\DVD_Image.iso -1
Bytes]
[01:33:36] Job NOT Done. There are warnings ... Find at
the log file the 0 byte generated file to focus where exactly
the problem appears

kayman · Post by **kayman** » Tue Oct 31, 2006 10:32 am

Really? Nobody has a solution for this problem???

Thx
Kay

Zadam · Post by **Zadam** » Tue Oct 31, 2006 10:44 pm

No one seems to have a solution it seems, I had a very similar problem a couple of weeks ago and have still not had a solution suggested

unstopology · Post by **unstopology** » Sat Nov 11, 2006 11:42 pm

I have the same problem. I have a AMD X2 939 now. Don't know if that makes any difference, but I never had problems with any of my Pentiums.

Post by **trustfm** » Wed Nov 15, 2006 6:33 am

this is an author error ... pretty strange ... did you have the same problem with other films ? try with another encoder ... i am working on the new version of avi2dvd which will be a lot better on these debagging cases sinse it will be modular ... just give me some time thanks !

yiori13 · Post by **yiori13** » Wed Nov 22, 2006 1:30 pm

[01:33:30] Zero subtitles found
[01:33:30] Author script generation ...
[01:33:30] Author script generated successfully !
[01:33:30] Start authoring ...
[01:33:35] Dvd authored successfully ! [
D:\lwr\Avi2dvd_temp\DVD ]
[01:33:35] Generating iso ...
[01:33:36] Iso generated successfully ! This is the file that
you must burn --> [D:\lwr\Avi2dvd_temp\DVD_Image.iso -1
Bytes] "

It seems to go wrong from the subtitle part.

From my experience, this is more to do with the subtitle. I have some jap animations with subs and try to put them on a dvd. I load the sub titles in step3 in Avi2Dvd, and the audio and video encoding was peferct, then the program tries to mux the file with subtitle and I got a 0 byte muxed file.

I have tried different settings in the subtitle part, but the program just doesn't mux video with subtitle. So I gave up and "hard code" the subtitle on the video and then convert.