Everything seems to work then I get this message Why 0 bytes
Posted: Sat Dec 17, 2005 5:49 pm
What did I do wrong and how do i do it right?
11:38:07 PM] AVI2DVD Started !
[11:38:10 PM] Type mode : Avi Input
[11:38:10 PM] Output : Dvd
[11:38:10 PM] Encoder Selected : QuEnc
[11:38:12 PM] Start demuxing the AudioStream No.1 ...
[11:40:18 PM] Demuxing of the selected audio finished
successfully ! [F:\Avi2dvd_temp\Extracted_Audio.mp3
72610752 Bytes]
[11:40:20 PM] Audio extracted renamed successfully !
[F:\Avi2dvd_temp\Fixed_Audio01.mp3 72610752 Bytes]
[11:40:20 PM] Starts Mp3->Ac3 convertion ...
[12:05:47 AM] Audio converted in Ac3 successfully !
[F:\Avi2dvd_temp\AudioStream 1 MP3 2CH.ac3
215775744 Bytes]
[12:05:47 AM] Start creating avisynth script ...
[12:05:47 AM] Avisynth script created successfully !
[F:\Avi2dvd_temp\Avisynth_Script_File.avs 182 Bytes]
[12:05:49 AM] Bitrate used : 7578 Kbpps
[12:05:49 AM] Start video encoding ...
[1:01:28 AM] Video encoded successfully !
[F:\Avi2dvd_temp\Encoded_Video.m2v 0 Bytes]
[1:01:29 AM] Job NOT Done. There are warnings ... Find at
the log file the 0 byte generated file to focus where exactly
the problem appears
Thanks for any suggestions
11:38:07 PM] AVI2DVD Started !
[11:38:10 PM] Type mode : Avi Input
[11:38:10 PM] Output : Dvd
[11:38:10 PM] Encoder Selected : QuEnc
[11:38:12 PM] Start demuxing the AudioStream No.1 ...
[11:40:18 PM] Demuxing of the selected audio finished
successfully ! [F:\Avi2dvd_temp\Extracted_Audio.mp3
72610752 Bytes]
[11:40:20 PM] Audio extracted renamed successfully !
[F:\Avi2dvd_temp\Fixed_Audio01.mp3 72610752 Bytes]
[11:40:20 PM] Starts Mp3->Ac3 convertion ...
[12:05:47 AM] Audio converted in Ac3 successfully !
[F:\Avi2dvd_temp\AudioStream 1 MP3 2CH.ac3
215775744 Bytes]
[12:05:47 AM] Start creating avisynth script ...
[12:05:47 AM] Avisynth script created successfully !
[F:\Avi2dvd_temp\Avisynth_Script_File.avs 182 Bytes]
[12:05:49 AM] Bitrate used : 7578 Kbpps
[12:05:49 AM] Start video encoding ...
[1:01:28 AM] Video encoded successfully !
[F:\Avi2dvd_temp\Encoded_Video.m2v 0 Bytes]
[1:01:29 AM] Job NOT Done. There are warnings ... Find at
the log file the 0 byte generated file to focus where exactly
the problem appears
Thanks for any suggestions