Trust Fm

When i want to convert my avi to a dvd file i only get a encoded video, audiostream and a scirpt file. But from the guide that i`m using it need to make a video_ts and a audio_ts map but that isn`t happing So does any1 have a idea how i need to convert it then or how i can burn the encoded video on a dvd so i can open it on my tv

Greetz Niek Eisink

Take a look at this guide:http://www.afterdawn.com/guides/archive ... vi2dvd.cfm

I think I am getting the same thing you are... a log file, audio stream, encoded video and a script file... no ISO though. Wondering what the problem could be as well.

When I use the method a shown on this site using QuENC encoder, I do not get the encoded video... but all the other files I noted above. When I use the method noted at the link above, I get all the files I noted but still no ISO to burn.

Am I/we doing something wrong? FWIW, here's my log from last failure:

[12:45:50 PM] AVI2DVD Started !
[12:45:52 PM] Type mode : Avi Input
[12:45:52 PM] Output : Dvd
[12:45:52 PM] Encoder Selected : QuEnc
[12:45:52 PM] Start demuxing the AudioStream No.1 ...
[12:46:10 PM] Demuxing of the selected audio finished
successfully ! [I:\Avi2dvd_temp\Extracted_Audio.ac3
119057959 Bytes]
[12:46:11 PM] Audio extracted renamed successfully !
[I:\Avi2dvd_temp\Fixed_Audio01.ac3 119057959 Bytes]
[12:46:11 PM] Starts Ac3->Ac3 convertion ...
[12:46:11 PM] Audio converted in Ac3 successfully !
[I:\Avi2dvd_temp\AudioStream 1 AC3 2CH.ac3 119057959
Bytes]
[12:46:11 PM] Start creating avisynth script ...
[12:46:11 PM] Avisynth script created successfully !
[I:\Avi2dvd_temp\Avisynth_Script_File.avs 144 Bytes]
[12:46:11 PM] Bitrate used : 7744 Kbpps
[12:46:11 PM] Start video encoding ...
[3:53:48 PM] Video encoded successfully !
[I:\Avi2dvd_temp\Encoded_Video.m2v 1866939127 Bytes]
[3:53:48 PM] Muxing Video+Audio(s) ...
[3:53:49 PM] M2v muxed successfully !
[I:\Avi2dvd_temp\Encoded_Video_Muxed.mpg -1 Bytes]
[3:53:49 PM] Job NOT Done. There are warnings ... Find at
the log file the 0 byte generated file to focus where exactly
the problem appears

Hi guys,

I have the very same problem posted by xeon. In my case, the running time and the size of files obtained may change between different conversions, but at the end I always get the same problem, here is basically the same list posted by xeon that I got, any good ideas???

thanks a ot
jocha

[4:44:10 PM] AVI2DVD Started !
[4:44:11 PM] Type mode : Avi Input
[4:44:11 PM] Output : Dvd
[4:44:11 PM] Encoder Selected : QuEnc
[4:44:11 PM] Start demuxing the AudioStream No.1 ...
[4:54:18 PM] Demuxing of the selected audio finished successfully ! [I:\El Abrazo Partido arg2004\Avi2dvd_temp\Extracted_Audio.mp3 92254080 Bytes]
[4:54:20 PM] Audio extracted renamed successfully ! [I:\El Abrazo Partido arg2004\Avi2dvd_temp\Fixed_Audio01.mp3 92254080 Bytes]
[4:54:20 PM] Starts Mp3->Ac3 convertion ...
[5:11:46 PM] Audio converted in Ac3 successfully ! [I:\El Abrazo Partido arg2004\Avi2dvd_temp\AudioStream 1 MP3 2CH.ac3 288580608 Bytes]
[5:11:46 PM] Start creating avisynth script ...
[5:11:46 PM] Avisynth script created successfully ! [I:\El Abrazo Partido arg2004\Avi2dvd_temp\Avisynth_Script_File.avs 210 Bytes]
[5:11:47 PM] Bitrate used : 5571 Kbpps
[5:11:47 PM] Start video encoding ...
[5:11:48 PM] Video encoded successfully ! [I:\El Abrazo Partido arg2004\Avi2dvd_temp\Encoded_Video.m2v 0 Bytes]
[5:11:48 PM] Job NOT Done. There are warnings ... Find at the log file the 0 byte generated file to focus where exactly the problem appears
[5:11:48 PM] All Jobs Done !!!

Hi guys,

I posted a message several days ago because I had the same problems that many of you pointed out: AVI to DVD only was doing the audio conversion, but not the movie conversion.
A put the AVI2DVD to work one hour ago again, just to see what happened, but meanwhile I was installing a different softwre to do the same. Well, apparently this software installed the code for

AviSynth
(A powerful video programming language for post-production editing)

as part of the needed things, and I believe onverting the is the reason why AVItoDVD was not working before
The software has just finished to DVD and it worked perfect!, even with the subtitles! Now I am trying one movie that has two CDs.

good luck!

Hi,

I am using avi2dvd for the first time and created an iso-image. Perfect so far. But when I play this on my computer no sound and subtitles are present. Also after burning this image no sound and subtitles are there. But the software package says it did transcode, mux, etc everything. Somebody knows what is wrong ?

Thank you.

Here is the logfile from the problem mentioned above here:

[10:58:17] Start creating avisynth script ...
[10:58:17] Avisynth script created successfully !
[D:\Data\Te branden\Films\Sound of
thunder\Avi2dvd_temp\Avisynth_Script_File.avs 187 Bytes]
[10:58:18] Bitrate used : 5833 Kbpps
[10:58:18] Start video encoding ...
[16:31:43] Video encoded successfully ! [D:\Data\Te
branden\Films\Sound of
thunder\Avi2dvd_temp\Encoded_Video.m2v 2532231236
Bytes]
[16:31:43] Muxing Video+Audio(s) ...
[16:35:59] M2v muxed successfully ! [D:\Data\Te
branden\Films\Sound of
thunder\Avi2dvd_temp\Encoded_Video_Muxed.mpg
2878371840 Bytes]
[16:35:59] One subtitle found
[16:35:59] Spumux script generation ...
[16:35:59] Spumux script generated successfully !
[16:35:59] Muxing the subtitle...
[16:42:27] Subitles muxed successfully ! [D:\Data\Te
branden\Films\Sound of
thunder\Avi2dvd_temp\Encoded_Video_Muxed_Subbed.m
pg 2881857536 Bytes]
[16:42:27] Author script generation ...
[16:42:27] Author script generated successfully !
[16:42:27] Start authoring ...
[16:48:14] Dvd authored successfully ! [ D:\Data\Te
branden\Films\Sound of thunder\Avi2dvd_temp\DVD ]
[16:48:14] Generating iso ...
[16:51:18] Iso generated successfully ! This is the file that
you must burn --> [D:\Data\Te branden\Films\Sound of
thunder\Avi2dvd_temp\DVD_Image.iso 2881148928
Bytes]
[16:51:18] Job Done !!!

Anyone knows the origin of the problem ???

In addition to the problem above: if I open the first VOB-file then I have sound, but still no subtitles.
The problem above (no sound and subtitles) happens when iso-image is opened or burned.

Help !!

Hi, take a look at the list of tasks that your computer does compared to mine (my posting is a couple of messages before yours). You will see that in your case, the computer is not doing the audio thing (is beginning directly with the AviSynth code or whatever).
You obviously have a problem with the audio. Does AVI2DVD show you an audio stream when you select the AVI file at the very beginning?
Subtitles: check that the subtitles are in the right srt/txt format. There are several "formats", maybe AVI2DVD is reading the subtitle but is not in the right format and is not telling you anything

Hello, guys

This is the first time that I try to convert an avi to a dvd and I got a partial success but some errors as well. I can watch the picture but the sound and subs. aren?t working, the ISO wasn?t generated either. Apparently the video wasn?t mixed with the audio, I used the HC encoder.
Any suggestion?

ohh here is the log by the way...
Folder\Avi2dvd_temp\AudioStream 1 MP3 2CH.ac3
209098752 Bytes]
[2:51:27 AM] Start creating avisynth script ...
[2:51:27 AM] Avisynth script created successfully !
[C:\Documents and Settings\Owner\Desktop\New
Folder\Avi2dvd_temp\Avisynth_Script_File.avs 178 Bytes]
[2:51:30 AM] Bitrate used : 5223 Kbpps
[2:51:30 AM] Start video encoding ...
[10:57:10 AM] Video encoded successfully !
[C:\Documents and Settings\Owner\Desktop\New
Folder\Avi2dvd_temp\Encoded_Video.m2v 4256654651
Bytes]
[10:57:11 AM] Pulldown of the m2v is starting ...
[10:58:05 AM] M2v pulldowned successfully !
[C:\DOCUME~1\Owner\Desktop\NEWFOL~1
\AVI2DV~1\Pulldown_Video.m2v 217513984 Bytes]
[10:58:06 AM] Muxing Video+Audio(s) ...
[10:58:27 AM] M2v muxed successfully ! [C:\Documents
and Settings\Owner\Desktop\New
Folder\Avi2dvd_temp\Encoded_Video_Muxed.mpg
51314689 Bytes]
[10:58:27 AM] One subtitle found
[10:58:27 AM] Spumux script generation ...
[10:58:28 AM] Spumux script generated successfully !
[10:58:28 AM] Muxing the subtitle...
[10:59:18 AM] Subitles muxed successfully ! [C:\Documents
and Settings\Owner\Desktop\New
Folder\Avi2dvd_temp\Encoded_Video_Muxed_Subbed.mp
g 0 Bytes]
[10:59:18 AM] Job NOT Done. There are warnings ... Find
at the log file the 0 byte generated file to focus where
exactly the problem appears