Trust Fm

Apologies if this has been answered in another post, I've a good look and didn't find an exact match or answer. Appreciate any guidance anyone can provide.

BTW thanks to the author for a great program, I've had very good luck using this program, its brilliant! I love the music as well



I've recently upgraded to version 0.4.3. My avi conversion is failing for one AVI file when muxing the audio and video files. I've tried it twice using QuEnc and once using NuEnc. When using NuEnc I got a debug.log file that had these two messages inside:

[mpeg2video @ 6551400C]Error: 2pass curve failed to converge
[mpeg2video @ 6551400C]Error: The requested bitrate is too high! Target size is now 1491353kbytes

Here is the AVI2DVD_log file output:

[8:57:26 PM] AVI2DVD Started !
[8:57:30 PM] Type mode : Avi Input
[8:57:30 PM] Output : Dvd
[8:57:30 PM] Encoder Selected : NuEnc
[8:57:30 PM] Start demuxing the AudioStream No.1 ...
[8:58:01 PM] Demuxing of the selected audio finished
successfully ! [C:\Documents and Settings\The Dicks\My
Documents\My DVDs\The
Ca\Avi2dvd_temp\Extracted_Audio.ac3 116522356
Bytes]
[8:58:03 PM] Audio extracted renamed successfully !
[C:\Documents and Settings\The Dicks\My
Documents\My DVDs\The
Ca\Avi2dvd_temp\Fixed_Audio01.ac3 116522356
Bytes]
[8:58:03 PM] Starts Ac3->Ac3 convertion ...
[8:58:03 PM] Audio converted in Ac3 successfully !
[C:\Documents and Settings\The Dicks\My
Documents\My DVDs\The
Ca\Avi2dvd_temp\AudioStream 1 AC3 2CH.ac3
116522356 Bytes]
[8:58:03 PM] Start creating avisynth script ...
[8:58:03 PM] Avisynth script created successfully !
[C:\Documents and Settings\The Dicks\My
Documents\My DVDs\The
Ca\Avi2dvd_temp\Avisynth_Script_File.avs 207 Bytes]
[8:58:03 PM] Bitrate used : 5985 Kbpps
[8:58:03 PM] Start video encoding ...
[3:53:07 AM] Video encoded successfully ! [C:\Documents
and Settings\The Dicks\My Documents\My DVDs\The
Ca\Avi2dvd_temp\Encoded_Video.m2v 1224404458
Bytes]
[3:53:07 AM] Pulldown of the m2v is starting ...
[3:55:28 AM] M2v pulldowned successfully !
[C:\DOCUME~1\THEDIC~1\MYDOCU~1\MYDVDS~1\T
HECA~1\AVI2DV~1\Pulldown_Video.m2v 1224404458
Bytes]
[3:55:28 AM] Muxing Video+Audio(s) ...
[3:55:29 AM] M2v muxed successfully ! [C:\Documents and
Settings\The Dicks\My Documents\My DVDs\The
Ca\Avi2dvd_temp\Encoded_Video_Muxed.mpg -1
Bytes]
[3:55:29 AM] Job NOT Done. There are warnings ... Find at
the log file the 0 byte generated file to focus where exactly
the problem appears

try the 0.4.4 is out now !

Thank you. I will try it.
When I went to version 0.4.3 I did a full uninstall and I assume that is best practice. Is there anthing I need to do to save my menus created in 0.4.3 prior to installing 0.4.4?

for the time beeing the menus cannot be saved ... sorry

I have tried both 0.4.3 and 0.4.4. I get the same problem. I have a 16x9 AVI NTSC file which plays in WMP. No matter which encoder I choose I get the same result:

[12:08:02 AM] Muxing Video+Audio(s) ...
[12:08:03 AM] M2v muxed successfully !
[C:\Movies\Avi2dvd_temp\Encoded_Video_Muxed.mpg -1
Bytes]
[12:08:03 AM] Job NOT Done. There are warnings ... Find
at the log file the 0 byte generated file to focus where
exactly the problem appears


FWIW, NeroVision gets nmc_processing_exception and Roxio EMC8 can't even find the audio, so you are in good company.

Ok. So installing version 0.4.4 (clean install) has resolved the problem described in my original post. The file converted ok and seems to be the correct size. I have previewed it in WMP, its all ok!!

GREAT NEWS !!!!

Unfortunately, I've tried quite a few passes using 0.4.4 and I still get the log below. Any ideas of what I might look at?

[2:24:08 PM] AVI2DVD Started !
[2:24:10 PM] Type mode : Avi Input
[2:24:10 PM] Output : Dvd
[2:24:10 PM] Encoder Selected : FreeEnc
[2:24:10 PM] Start demuxing the AudioStream No.1 ...
[2:25:15 PM] Demuxing of the selected audio finished successfully ! [C:\Movies\Avi2dvd_temp\Extracted_Audio.ac3 219275948 Bytes]
[2:25:15 PM] Starts Audio correction ...
[2:25:38 PM] Audio Fixed successfully ! [C:\Movies\Avi2dvd_temp\Fixed_Audio01.ac3 219274496 Bytes]
[2:25:38 PM] Starts Ac3->Ac3 convertion ...
[2:25:39 PM] Audio converted in Ac3 successfully ! [C:\Movies\Avi2dvd_temp\AudioStream 1 AC3 6CH.ac3 219275948 Bytes]
[2:25:39 PM] Start creating avisynth script ...
[2:25:39 PM] Avisynth script created successfully ! [C:\Movies\Avi2dvd_temp\Avisynth_Script_File.avs 146 Bytes]
[2:25:46 PM] Bitrate used : 7552 Kbpps
[2:25:46 PM] Start video encoding ...
[4:04:13 PM] Video encoded successfully ! [C:\Movies\Avi2dvd_temp\Encoded_Video.m2v 839147553 Bytes]
[4:04:13 PM] Pulldown of the m2v is starting ...
[4:06:19 PM] M2v pulldowned successfully ! [C:\Movies\AVI2DV~1\Pulldown_Video.m2v 839147553 Bytes]
[4:06:19 PM] Muxing Video+Audio(s) ...
[4:06:20 PM] M2v muxed successfully ! [C:\Movies\Avi2dvd_temp\Encoded_Video_Muxed.mpg -1 Bytes]
[4:06:20 PM] Job NOT Done. There are warnings ... Find at the log file the 0 byte generated file to focus where exactly the problem appears
[4:06:20 PM] All Jobs Done !!!